GSP216

Overview

Google Cloud offers Internal Load Balancing for your TCP/UDP-based traffic. Internal Load Balancing enables you to run and scale your services behind a private load balancing IP address that is accessible only to your internal virtual machine instances.

In this lab you create two managed instance groups in the same region. Then, you configure and test an Internal Load Balancer with the instances groups as the backends, as shown in this network diagram:

Objectives

In this lab you learn how to perform the following tasks:

• Create HTTP and health check firewall rules
• Configure two instance templates
• Create two managed instance groups
• Configure and test an internal load balancer

Setup and requirements

Before you click the Start Lab button

Read these instructions. Labs are timed and you cannot pause them. The timer, which starts when you click Start Lab, shows how long Google Cloud resources will be made available to you.

This hands-on lab lets you do the lab activities yourself in a real cloud environment, not in a simulation or demo environment. It does so by giving you new, temporary credentials that you use to sign in and access Google Cloud for the duration of the lab.

To complete this lab, you need:

• Access to a standard internet browser (Chrome browser recommended).

Note: Use an Incognito or private browser window to run this lab. This prevents any conflicts between your personal account and the Student account, which may cause extra charges incurred to your personal account.

• Time to complete the lab---remember, once you start, you cannot pause a lab.

Note: If you already have your own personal Google Cloud account or project, do not use it for this lab to avoid extra charges to your account.

How to start your lab and sign in to the Google Cloud console

1. Click the Start Lab button. If you need to pay for the lab, a pop-up opens for you to select your payment method. On the left is the Lab Details panel with the following:

   • The Open Google Cloud console button
   • Time remaining
   • The temporary credentials that you must use for this lab
   • Other information, if needed, to step through this lab

2. Click Open Google Cloud console (or right-click and select Open Link in Incognito Window if you are running the Chrome browser).

   The lab spins up resources, and then opens another tab that shows the Sign in page.

   Tip: Arrange the tabs in separate windows, side-by-side.

   Note: If you see the Choose an account dialog, click Use Another Account.

3. If necessary, copy the Username below and paste it into the Sign in dialog.

   {{{user_0.username | "Username"}}}

   You can also find the Username in the Lab Details panel.

4. Click Next.

5. Copy the Password below and paste it into the Welcome dialog.

   {{{user_0.password | "Password"}}}

   You can also find the Password in the Lab Details panel.

6. Click Next.

   Important: You must use the credentials the lab provides you. Do not use your Google Cloud account credentials. Note: Using your own Google Cloud account for this lab may incur extra charges.

7. Click through the subsequent pages:

   • Accept the terms and conditions.
   • Do not add recovery options or two-factor authentication (because this is a temporary account).
   • Do not sign up for free trials.

After a few moments, the Google Cloud console opens in this tab.

Note: To view a menu with a list of Google Cloud products and services, click the Navigation menu at the top-left.

Task 1. Configure HTTP and health check firewall rules

Configure firewall rules to allow HTTP traffic to the backends and TCP traffic from the Google Cloud health checker.

Explore the my-internal-app network

The network my-internal-app with subnet-a and subnet-b along with firewall rules for RDP, SSH, and ICMP traffic have been configured for you.

1. In the console, navigate to Navigation menu > VPC network > VPC networks.

2. Scroll down and notice the my-internal-app network with its subnets: subnet-a and subnet-b

   Each Google Cloud project starts with the default network. In addition, the my-internal-app network has been created for you, as part of your network diagram.

   You will create the managed instance groups in subnet-a and subnet-b. Both subnets are in the region because an Internal Load Balancer is a regional service. The managed instance groups will be in different zones, making your service immune to zonal failures.

Create the HTTP firewall rule

Create a firewall rule to allow HTTP traffic to the backends from the Load Balancer and the internet (to install Apache on the backends).

1. Still in VPC network, in the left pane click Firewall.

2. Notice the app-allow-icmp and app-allow-ssh-rdp firewall rules.

   These firewall rules have been created for you.

3. Click + Create Firewall Rule.

4. Set the following values, leave all other values at their defaults:

   Property	Value (type value or select option as specified)
   Name	app-allow-http
   Network	my-internal-app
   Targets	Specified target tags
   Target tags	lb-backend
   Source filter	IPv4 Ranges
   Source IPv4 ranges	10.10.0.0/16
   Protocols and ports	Specified protocols and ports, and then check tcp, type: 80

Note: Make sure to include the /16 in the Source IPv4 ranges to specify all networks.

5. Click Create.

Create the health check firewall rules

Health checks determine which instances of a Load Balancer can receive new connections. For Internal load balancing, the health check probes to your load balanced instances come from addresses in the ranges 130.211.0.0/22 and 35.191.0.0/16. Your firewall rules must allow these connections.

1. Still in the Firewall rules page, click + Create Firewall Rule.

2. Set the following values, leave all other values at their defaults:

   Property	Value (type value or select option as specified)
   Name	app-allow-health-check
   Network	my-internal-app
   Targets	Specified target tags
   Target tags	lb-backend
   Source filter	IPv4 Ranges
   Source IPv4 ranges	130.211.0.0/22 and 35.191.0.0/16
   Protocols and ports	Specified protocols and ports, and then check tcp

Note: Make sure to enter the two Source IPv4 ranges one-by-one and pressing SPACE in between them.

3. Click Create.

Click Check my progress to verify the objective.

Configure HTTP and health check firewall rules

Task 2. Configure instance templates and create instance groups

A managed instance group uses an instance template to create a group of identical instances. Use these to create the backends of the Internal Load Balancer.

Configure the instance templates

An instance template is an API resource that you can use to create VM instances and managed instance groups. Instance templates define the machine type, boot disk image, subnet, labels, and other instance properties. Create an instance template for both subnets of the my-internal-app network.

1. In the Console, navigate to Navigation menu > Compute Engine > Instance templates.

2. Click Create instance template.

3. For Name, type instance-template-1.

4. For Location, Select Global.

5. For Series, select E2.

6. For Machine type, select Shared-core > e2-micro.

7. Click Advanced options.

8. Click Networking.

9. For Network tags, specify lb-backend.

   Note: The network tag lb-backend ensures that the HTTP and Health Check firewall rules apply to these instances.

10. For Network interfaces, click the dropdown icon to edit.

11. Set the following values, leave all other values at their defaults:

    Property	Value (type value or select option as specified)
    Network	my-internal-app
    Subnetwork	subnet-a
    External IPv4 Address	None

12. Click Done.

13. Click Management.

14. Under Metadata, click Add item and specify the following:

    Key 1	Value 1
    startup-script-url	gs://cloud-training/gcpnet/ilb/startup.sh

Note: The startup-script-url specifies a script that will be executed when instances are started. This script installs Apache and changes the welcome page to include the client IP and the name, region and zone of the VM instance. Feel free to explore this script.

15. Click Create.
16. Wait for the instance template to be created.

Configure the next instance template

Create another instance template for subnet-b by copying instance-template-1:

1. Still in Instance templates, check the box next to instance-template-1, then click Copy. Make sure to update the name as instance-template-2.
2. Click Advanced options.
3. Click the Networking tab.
4. For Network interfaces, click the dropdown icon to edit.
5. Select subnet-b as the Subnetwork.
6. Click Done and then click Create.

Create the managed instance groups

Create a managed instance group in subnet-a and one subnet-b.

Note: Identify one of the other zones in the same region as subnet-a. For example, if your zone of subnet-a is us-west2-a, you could select us-west2-b for subnet-b.

1. Still in Compute Engine, in the left pane click Instance groups, and then click Create Instance group.

2. Set the following values, leave all other values at their defaults:

   Property	Value (type value or select option as specified)
   Name	instance-group-1
   Instance template	instance-template-1
   Location	Single-zone
   Region
   Zone
   Autoscaling > Minimum number of instances	1
   Autoscaling > Maximum number of instances	5
   Autoscaling > Autoscaling signals (click the dropdown icon to edit) > Signal type	CPU utilization
   Target CPU utilization	80
   Initialization period	45

Note: Managed instance groups offer autoscaling capabilities that allow you to automatically add or remove instances from a managed instance group based on increases or decreases in load. Autoscaling helps your applications gracefully handle increases in traffic and reduces cost when the need for resources is lower. You just define the autoscaling policy and the autoscaler performs automatic scaling based on the measured load.

3. Click Create.

   Repeat the same procedure for instance-group-2 in the different zone of same region as subnet-a:

4. Click Create Instance group.

5. Set the following values, leave all other values at their defaults:

   Property	Value (type value or select option as specified)
   Name	instance-group-2
   Instance template	instance-template-2
   Location	Single-zone
   Region
   Zone	Zone (Use the different zone in same region as subnet-a)
   Autoscaling > Minimum number of instances	1
   Autoscaling > Maximum number of instances	5
   Autoscaling > Autoscaling signals (click the dropdown icon to edit) > Signal type	CPU utilization
   Target CPU utilization	80
   Initialization period	45

6. Click Create.

Verify the backends

Verify that VM instances are being created in both subnets and create a utility VM to access the backends' HTTP sites.

1. Still in Compute Engine, click VM instances.

2. Notice two instances that start with instance-group-1 and instance-group-2.

   These instances are in separate zones and their internal IP addresses are part of the subnet-a and subnet-b CIDR blocks.

3. To create a new instance, click Create Instance.

4. In the Machine configuration.

   Select the following values:

   Property	Value (type value or select option as specified)
   Name	utility-vm
   Region
   Zone
   Series	E2
   Machine Type	e2-micro (1 shared vCPU)

5. Click Networking.

   For Network interfaces, click ADD A NETWORK INTERFACE

   Specify the following:

   Property	Value (type value or select option as specified)
   Network	my-internal-app
   Subnetwork	subnet-a
   Primary internal IPv4 address	Ephemeral (Custom)
   Custom ephemeral IP address	10.10.20.50

6. Click Done and then click Create.

Click Check my progress to verify the objective.

Configure instance templates and create instance groups

7. Note that the internal IP addresses for the backends are 10.10.20.2 and 10.10.30.2.

Note: If these IP addresses are different, replace them in the two curl commands below.

8. For utility-vm, click SSH to launch a terminal and connect.
9. To verify the welcome page for instance-group-1-xxxx, run the following command:

curl 10.10.20.2

The output should look like this:

<h1>Internal Load Balancing Lab</h1><h2>Client IP</h2>Your IP address : 10.10.20.50<h2>Hostname</h2>Server Hostname: instance-group-1-1zn8<h2>Server Location</h2>Region and Zone: us-central1-a

10. To verify the welcome page for instance-group-2-xxxx, run the following command:

curl 10.10.30.2

The output should look like this:

<h1>Internal Load Balancing Lab</h1><h2>Client IP</h2>Your IP address : 10.10.20.50<h2>Hostname</h2>Server Hostname: instance-group-2-q5wp<h2>Server Location</h2>Region and Zone: us-central1-b

Note: The curl commands demonstrate that each VM instance lists the Client IP and its own name and location. This will be useful when verifying that the Internal Load Balancer sends traffic to both backends.

11. Close the SSH terminal to utility-vm:

exit

Task 3. Configure the Internal Load Balancer

Configure the Internal Load Balancer to balance traffic between the two backends (instance-group-1 and instance-group-2), as illustrated in this diagram:

Start the configuration

1. From the Navigation Menu, select View All Products. Under Networking, select Network Services.
2. Select the Load balancing page.
3. Click Create load balancer.
4. For Type of load balancer, select Network Load Balancer (TCP/UDP/SSL).
5. For Proxy or passthrough, select Passthrough load balancer.
6. For Public facing or internal, select Internal.
7. Click CONFIGURE.
8. For Name, type my-ilb.
9. For Region, select .
10. For Network, select my-internal-app.

Configure the regional backend service

The backend service monitors instance groups and prevents them from exceeding configured usage.

1. Click on Backend configuration.

2. Set the following values, leave all other values at their defaults:

   Property	Value (select option as specified)
   Instance group	instance-group-1

3. Click Add a backend.

4. For Instance group, select instance-group-2.

5. For Health Check, select Create a health check.

6. Set the following values, leave all other values at their defaults:

   Property	Value (select option as specified)
   Name	my-ilb-health-check
   Protocol	TCP
   Port	80

Note: Health checks determine which instances can receive new connections. This HTTP health check polls instances every 5 seconds, waits up to 5 seconds for a response and treats 2 successful or 2 failed attempts as healthy or unhealthy, respectively.

7. Click Save.
8. Verify that there is a blue check mark next to Backend configuration in the Cloud Console. If not, double-check that you have completed all the steps above.

Configure the frontend

The frontend forwards traffic to the backend.

1. Click on Frontend configuration.

2. Specify the following, leaving all other values with their defaults:

   Property	Value (type value or select option as specified)
   Subnetwork	subnet-b
   Internal IP	Under IP address select Create IP address

3. Specify the following, leaving all other values with their defaults:

   Property	Value (type value or select option as specified)
   Name	my-ilb-ip
   Static IP address	Let me choose
   Custom IP address	10.10.30.5

4. Click Reserve.

5. In Port number, type 80.

6. Click Done .

Review and create the Internal Load Balancer

1. Click on Review and finalize.

2. Review the Backend and Frontend.

3. Click on Create. Wait for the Load Balancer to be created, before moving to the next task.

Click Check my progress to verify the objective.

Configure the Internal Load Balancer

Task 4. Test the Internal Load Balancer

Verify that the my-ilb IP address forwards traffic to instance-group-1 and instance-group-2.

Access the Internal Load Balancer

1. In the Cloud Console, navigate to Navigation menu > Compute Engine > VM instances.
2. For utility-vm, click SSH to launch a terminal and connect.
3. To verify that the Internal Load Balancer forwards traffic, run the following command:

curl 10.10.30.5

The output should look like this:

<h1>Internal Load Balancing Lab</h1><h2>Client IP</h2>Your IP address : 10.10.20.50<h2>Hostname</h2>Server Hostname: instance-group-1-1zn8<h2>Server Location</h2>Region and Zone: us-central1-a Note: As expected, traffic is forwarded from the Internal Load Balancer (10.10.30.5) to the backend.

4. Run the same command a couple more times.

In the output, you should be able to see responses from instance-group-1 in and instance-group-2 in the different zone of same region.

Congratulations!

In this lab you created two managed instance groups in the region, along with firewall rules to allow HTTP traffic to those instances and TCP traffic from the Google Cloud health checker. Then, you configured and tested an Internal Load Balancer for those instance groups.

Next steps / Learn more

For information on the basic concepts of Load Balancing, see Google Cloud Load Balancing Documentation.

Google Cloud training and certification

...helps you make the most of Google Cloud technologies. Our classes include technical skills and best practices to help you get up to speed quickly and continue your learning journey. We offer fundamental to advanced level training, with on-demand, live, and virtual options to suit your busy schedule. Certifications help you validate and prove your skill and expertise in Google Cloud technologies.

Manual Last Updated December 11, 2024

Lab Last Tested October 21, 2024

Copyright 2024 Google LLC All rights reserved. Google and the Google logo are trademarks of Google LLC. All other company and product names may be trademarks of the respective companies with which they are associated.